RF RADIO FREQUENCY SKIN TIGHTEN ACNE WRINKLE FAT BURN 10Mhz

This is a complete and new unit with all accessories included. Comes with 1 year warranty worldwide.

Standing is not included that needs extra $200

• You are buying a Brand New RF RADIO FREQUENCY with all accessories included.
• 100% satisfaction Guaranteed. The Best Deal on the Internet

Radio Frequency Facial Treatment

Radio frequency is also called diathermy(deep heating) which is the system to provide the treatment by generating the heat from inside the human body. Wrinkles and loose skin can take its toll on your looks. Even healthy and active people eventually show signs of aging on their faces. Since it's the most important visual feature of your body—the one that most people will recognize you by—it's important to keep your face fresh and youthful. More and more people have tried face lifts over the years to combat wrinkles and skin imperfections. Though often successful, traditional face lifts require minor surgery and prolonged recovery periods. There's increasing demand for non-surgical techniques to refresh facial appearances. That's where radio frequency face lifts come into play.

A radio frequency emitter is pressed up against the skin. These radio waves get past the outer skin layers and deliver heat energy to the muscles and tissues beneath. The heat helps to contract these layers and build up collagen levels. The overall result tightens up the outer layers of skin and reduces wrinkling effects. Since there's a lot of heat involved, some cooling must be applied to the skin at the same time.

The radio frequency face lift was approved by the FDA as a non-surgical treatment for wrinkles and facial skin imperfections. It is a proven medical procedure that requires no scalpels or sutures. It's also a popular choice for busy professionals who care about their looks. The treatment only takes about an hour, and full recovery is expected in a few days. The results take a bit of time to show fully though. Some results are visible immediately, while the full results take a few months to develop as the deep tissue layers heal.

Feature

1.Easy and safe to operate.
2.Quick result can be seen
3.LCD Display
4.Frequency up to 10mzh
5.Four Treatment Heads 15 20 30 43mm

al Information

• Both 110v and 220v voltage version are available. We will ship right voltage version to right region if buyer doesn't specify it.
• Power output: 260W
• Frequency 10Mhz
• Weight is about 15kg.

1. Main Machine X 1
2. Hand Piece X 1
3. Tip X 4 15 20 30 43mm
4. Return Pad Connection X 1
5. Return Pad X 1
6. Earthing Wire X 1
7. Power Cord X 1
8. Key X 2
9. Pedal Switch X 1
10. Holder X 2
11. Fuse X 2
12. Temperature Examiner X 1
13. Key Card X 1
14. User Card X 1
15. Operation Manual CD X 2
16. Manual X 1

We are able to provide you very good technical support as we have good technical knowledge and also good relationship with manufacturer and can get any replacement parts fast. Other sellers who buy machine from drop ship traders may not provide you good technical service.

What is the difference between mono,bi,tri-polar?

Function / Purpose:
Both monopolar and bipolar radiofrequency are used for tissue tightening. Their effects are somewhat complementary because they deliver energy in different patterns and to different depth. Combining monopolar and bipolar radiofrequency allows reduce the required intensity of each and thus minimize side effects and possibly increase effectiveness (as compared to each type of radiofrequency used alone). The combination of monopolar and bipolar radiofrequency has been used for skin tightening, facial contouring, body sculpting and cellulite reduction.

Details:
Monopolar and bipolar radiofrequency (RF) are the modes in which radiofrequency can be used in medicine and cosmetics. They can also be used in combination. (See our overview of radiofrequency treatments). As far as cosmetic rejuvenation is concerned, monopolar and bipolar radiofrequency treatments appear somewhat complimentary.

Monopolar RF heats tissue in the treated area is heated rather deeply (usually up to 20 mm) and thus affects both the skin and subcutaneous fat. Bipolar RF heats the tissue in the treated area less deeply (usually up to 2-4 mm) and thus primarily affects the skin. The patterns if energy distribution also differ. Whether simultaneous treatment with both types of RF is additive, synergistic or otherwise in not entirely clear and needs further research. The manufacturers of monopolar+bipolar devices believe that such combination is synergistic and allows to reduce the required intensity of each and thus minimize side effects and possibly increase effectiveness.

As of the time of this writing, the primary system of this type is TriPollar by Pollogen corporation. TriPollar combines the electrodes for the monopolar and bipolar RF application in the same hand piece. It also utilizes sophisticated control algorithms for optimizing the concurrent application of the two types of RF as well as tailoring the output to a particular patient and treatment goal.

According to Pollogen corporation, TriPollar RF Technology has the following advantages [as quoted from their materials]:

 

• Treatment is not painful -TriPollar RF technology focuses the RF energy right where it is needed requiring much lower energy than other RF technologies, thus avoiding the associated pain for the client.
• Treatment of both superficial and deeper fat layers - The TriPollar RF technology uses sophisticated algorithms to control the treatment electrodes varying the current and polarity to achieve variable energy focus in different fat layers resulting in visible clinical results from the first treatment.
• Selective heating of fat tissue - The TriPollar RF technology directs energy selectively to fat tissue avoiding heating to other tissues thus achieving better clinical results.
• No cooling of skin or applicator is needed - The TriPollar RF configuration and sophisticated control algorithm eliminates the need for skin and applicator cooling resulting in more efficient treatment and requires less treatment sessions.
• Fewer treatment sessions -TriPollar RF technology delivers focused energy achieving better and faster results.
• Light technology not required - applicable for all skin types and colors.

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 st1:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

Operate your rf machine directly ------That means you don’t start up it’s IC function.

Under this condition, It’s very simple to operate your rf machine without any card. Turn on your machine, setting the time(default time is 15 minutes, each press can increase and decrease 5 minutes), energy, tips and treatment area according to your needs (Usually we offered default parameters). Press stand by button, and you can enter into the stand by interface. You can see the image of hand piece on up right of the screen. Please ensure the good contact between tips and treatment area. Step on the food switch (pedal), you can do treatment normally. Now you can see the broadcasting image of hand piece on up right of the screen. If you want to close treatment, please move away the tips from the skin of treatment area and release the foot switch (pedal).

There are three kinds of card, which has relation with IC function. They’re Key card ( black color card), user card and unlock card ( pink VIP Card). Usually the five pink VIP Cards are blank (empty) card. You must issue user card and unlock card by yourselves before start up machine’s IC function.

Start up Function of IC Card

If you want to use machine’s IC function, You must start up it’s IC function. We use issued valid user card to do this job. Usually we start up machine’s function of IC Card when we finished issuing of user card. After finishing issuing of user card, turn on machine again after turn off machine, and insert issued valid user card with different hourly value, you can hear 3 sounds after one second. That shows you have successful start up machine’s IC function. From now you must operate this machine with valid user card. If you want to use this machine without user card, when you step on the pedal, you’ll hear one sound, the machine will prompt you “please insert user card”. Please draw out your user card if you don’t use it right now and turn off the machine.

Shut off Function of IC Card

Of course the premises is that you have started up it’s IC function earlier. If you don’t need the function of IC card any more, you want to shut off (Over) it’s IC function. Please insert unlock card after turning on your machine, you’ll hear 2 sounds after one second. The IC function is over. Draw out (take out) unlock card and at this time “----” is showed in time area of IC card. You have successfully shut off function of IC card；You can operate your machine without any card again.

To Issue User Card

Turn on the machine, insert key card (black card ), it enters issuing interface

1) Setting issued time：press “+”or“-”key in ENERGY to adjust issued time. Each press is increase or decrease 100 minutes and the adjustable scope is 0-9000 minutes;

2) To set type of issued card: the interface of issuing card is default situation of user card. If you want to adjust it, you press“+” or “-” in TIME. Type of issued card set “A：00”. Draw out key card and insert blank card ( one of VIP Card)

3) Press “STANDBY READY” key to issue；

At this time the energy increase gradually until the highest；

During the procedure, you could hear three sounds and you could see counting machine add 1 instead of 0. This shows that you have successfully issued card.

Then you could draw out IC card (successfully issued card )

4) If you want to issue more cards, you shall insert another card and repeat the above operation;

5) Finish the issuing card：Press “ITEM” key to exit issuing interface. If there is no any operation in one minute, system quit from issuing interface.

6) If you failed in issuing, there would be no showing. At this time, “FFFF” appears in time showing area of IC card

Issuing Unblock Card

1) After inserting key card, it enters issuing interface;

2) To set type of issued card: You press“+” or “-” in TIME. Type of issued card set “b：00”

3) Draw out key card and insert blank card ( one of VIP Card)

4) Press “STANDBY READY” key to issue；